null
Categories

Tape Planet Transparent Blue 2" x 10 yard Roll Premium Cast Vinyl Tape

Brand :

(No reviews yet) Write a Review
$8.98
SKU:
TT175BE2X10
UPC:
700953717955

Out of stock

Tape Planet Transparent Blue 2" x 10 yard Roll Premium Cast Vinyl Tape
Tape Planet 2 Mil pigmented transparent colored cast vinyl tape Is an optically clear marking tape with a long shelf-life, and "see through" capability which makes it an excellent decorative label protection tape. It provides a very effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalies and corrosive chemicals. It provides good abrasion, impact and rupture resistance.



PROPERTY
TEST METHOD
ENGLISH
METRIC
Thickness Film
Micrometer
.02 ± 10%
.050mm ± 10%
Thickness Adhesive
Micrometer
.001-.0012
.026mm - .032mm
Tensile Strength
Instron Tensile Tester
5 lb./in. minimum
.9 kg/cm minimum


- Jaw separation 2 in. and a speed
73°F
23°C
Elongation
Tensile Tester as above
100% at 73°F
100% minimum

For all properties given below, film was applied to an acrylic substrate at 73°F(23°C) 24 hours before testing


PROPERTY
TEST METHOD

ENGLISH

METRIC
Temperature Range

Good adhesion and minimal
staining when exposed to any
temperature within specified.

-20°F to 175°F
-29°C to 80°C
Adhesion
180° pullback at 12"(30.5cm) per minute

4.0 lb./in.

0.7 kg/cm

CHEMICAL RESISTANCE

Unless otherwise specified, the film was applied to an acrylic substrate at 73°F, 23°C 24 hours before testing. The samples are immersed in the noted chemical agent at 73°F, 23°C, and after testing are wiped clean.


CHEMICAL AGENT
EXPOSURE TIME
RESULTS
Water
24 hours
No effect
Mild soap and water
24 hours
No effect
20% Isopropyl Alcohol/80%water
10 minutes
No effect
10% Hydrochloric Acid
10 minutes
No effect
10% Ammonium Hydroxide
10 minutes
No effect

SHELF LIFE

Films have a shelf life of one year. Films and markings must be stored in a clean environment, free from direct sunlight, excessive moisture with temperatures of 73°F or less. Minimum application temperature 60°(16°C).


PERFORMANCE


When properly processed and exposed vertically, five to seven year performance may be expected. All performance statements are based upon field experience and exposure tests. Performance will be affected by substrate selection and preparation, exposure conditions and maintenance of the markings. In the case of south facing signs in areas of long, high temperature and maximum sunny days, such as the Southeastern area of the U.S., exterior performance will be decreased.

Customers Also Viewed